Inoxpa type 6400
Applications of Inoxpa ball valvs type 6400
The Inoxpa ball valve is used in hygienic processes, for example in the food industry. This type of valve can be used for viscous fluids containing solid particles.
Inoxpa ball valve is available as manually operated or air motor operated valves. The number of lantern rings has been reduced because of the centralized mounting points. Air motors are available in 2 versions:
• Single-acting actuator (air-opening/spring-closing)
• Double-acting actuator (air-opening/air-closing)
In addition to air-operated motors, an optional electric drive is also available.
The renewed valve tips enable you to use this type of valve in a pigging system.
To enable full control and actuation of the valves, Inoxpa has developed the renewed C-Top Smart control head. Interested in the features of this control head? Read all the details below or contact our consultants.
Product is no longer available.
| Articlenr. | Description | Dimension | Elastomer | Stock |
|---|---|---|---|---|
|
IN8JV6440100
|
Sparepartset 2-way ballvalve
DN100, (PTFE) NBR
Inoxpa
|
|
|
|
|
IN6400500550050
|
Spare part ball valve
Join EPDM FDA 177.2600
DN50
|
|
|
|
|
IN8JW9440025
|
Spare part set for
actuator singel seat valve
DN25/40 NBR
|
|
|
|
|
23156007CA
|
Ball valve spare part set
DN32 PTFE/MVQ (Sil.)
|
|
|
|
|
23156013CA
|
Ball valve spare part set
DN65 PTFE/MVQ (Sil.)
|
|
|
|
|
23156009CA
|
Ball valve spare part set
DN40/1.5" PTFE/MVQ (Sil.)
|
|
|
|
|
23156012CA
|
Ball valve spare part set
2.5" PTFE/MVQ (Sil.)
|
|
|
|
|
23156015CA
|
Ball valve spare part set
DN80 PTFE/MVQ (Sil.)
|
|
|
|
|
IN8JV6478065
|
Ball valve spare part set
DN65PTFE/FPM
|
|
|
|
|
23126011CA
|
Ball valve spare part set
DN50/2" NBR
|
|
|
|
|
IN8JV6452025
|
Ball valve spare part set
DN25/1" EPDM
|
|
|
|
|
23156014CA
|
Ball valve spare part set
3" PTFE/MVQ (Sil.)
|
|
|
|
| Materials | |
| Flanges | AISI 316L / 316 forged |
| Ball | AISI 316L |
| Seal | EPDM |
| Opartion | AISI 304 |
| Inside surface | Ra < 0.8 µm |
| Technical data | |
| Sizes | DN25 –DN100 / 1”- 4” |
| Temperature | Depends on seal |
| Max. product pressure DN25 – DN65 / 1”- 2½” | 10 bar |
| DN80 – DN100 / 3”- 4” | 8 bar |
| Options | |
| Valve | AISI304 |
| Seals | HNBR, FPM (Viton) |
| Connections | Weld, Thread or male liner |
| Position sensors | |
| C-TOP Smart | |
| Drain and clean connections | |
| Third hole | |
| ATEX version |