25,000 unique items in stock Consulting partner Thorough product knowledge
Go to homepage

SPX APV Delta SW4

Applying the SPX APV Delta SW4

The SPX APV Valve Type Delta SW4 is the successor to the larger sizes of the Delta S2. APV Valve Delta SW4, pneumatically operated air opening/closing spring (by turning the cylinder spring function can be easily changed) in sizes DN25 - DN150 and 1 "- 4". If desired, also manual available. This Single Seat Valve is standard equipped with welding ends, optionally available with various process connections.

The valve can be used as:

  • NC (Normally Closed) Drive feather falling
  • NO (Normally Open) Drive elevating spring

The Delta SW4 has a maintenance-free control head and is equipped with a CU41 Direct Connect Control Unit. The control unit displays the position by LED’s of the tappet. The control unit can be supplied in various versions:

  • Direct Connect
  • Profibus
  • DeviceNet
  • AS-Interface

The Delta SW4 can be used as a valve in the following options:

  • Manual operated
  • Tank Outlet
  • Long stroke verison
  • DPF (with steam room)
  • R4 (with control cone)

Filter
Articlenr. Description Stock
33126112AP
SPX APV Delta SW4
Change over valve Delta Type SW41 2.5" (Ø63.5), HNBR 316L Ra 0,8 m, PO / NC
Articlenr. Description Dimension Elastomer Stock
33150572AP
Sp.part set SWE41-42 2.5" VMQ
Spare part single seat valve Type Delta SWE41-42 Spare part set 2.5" VMQ
33120121AP
Servicekit S2 DN 10 HNBR
Servicekit single seat valve S2 NW10 HNBR
33120903AP
Gasket set HNBR DN80 SWE45/48
Spare part single seat valve Type Delta SWE45/48 Gasket set DN80 HNBR
33140913AP
Gasket SW41 2.5" viton
Spare part single seat valve SW4 Gasket FPM 2.5" H170668
33130119AP
Kit SW4 5"/NW125 (LL-LT-TT-TL) EPDM
Servicekit single seat House bodies LL-LT-TT-TL 5"/NW125 EPDM
APH175812
Sp.part SW41+42/SWE43+44 1.5" HNBR
Spare part single seat valve Seal kit SW41+42/SWE43+44 1.5" HNBR
33150312AP
Servicekit SW41/42/43/44 2.5" MVQ
Spare part Delta SW41/42 SWE43/44 Seal kit 2.5" MVQ
33100911AP
Lower housing SWE41 2.5"
Spare-part SWE41 Lower housing 2.5" 1-port 3A-
33150308AP
Servicekit SW41/42/43/44 1.5" MVQ
Spare part Delta SW41/42 SWE43/44 Seal kit DN40 + 1.5" MVQ
APH179469
Assembly tool SW4-65 flat 74,2 DIA
Tool Assembly tool SW4-65 flat 74,2 DIA
33136922AP
Shaft SW43 1"
Spare part single seat valve SW43 Shaft 1"
33130116AP
Sp.part set SW4 4" EPDM
Spare part set Delta SW4 4" EPDM
Material
 
Product contact parts 316L / 1.4404
ID finish Ra 1,6 μm
Other stainless steel parts 304 / 1.4301
Standard seals EPDM
Max. operating pressure 10 bar
Sizes EN-10357-A en EN-10357-D (BS4825)
Seal options MVQ, (Silicone), HNBR
Valve One-piece stainless steel
Driving
 
Required air pressure 6 to 8 bar
Spring closed or spring open Choice at the installation
Integrated lift n.a.
Mode of operation
 
Closed stand switching Downstairs
Valve seal One-piece seal
Visual leak detection n.a.
Cleanable leak room n.a.
Cleanable upper valve n.a.
Cleanable lower valve n.a.
Leak proof switching n.a.
balanced valves n.a.
Maintenance
 
House link Clamp
Revision / disassembly In line demountable upwards (only as stop valve)
Special tools necessary Yes, fort the seals